Tekcem Industrial Plus 025 | 2-25mm 25kg

Overview

TEKCEM 025 INDUSTRIAL PLUS is an advanced, versatile floor screed designed for application over sound substrates, such as concrete and high-strength sand/cement screeds. It can be applied in thicknesses ranging from 2mm to 25mm in one pour, making it ideal for creating smooth, durable surfaces in heavy-duty commercial or light-medium duty industrial environments like warehouses and workshops.

This product sets quickly, allowing light foot traffic in just 3 hours, light forklift traffic after 24 hours, and full traffic after 7 days. TEKCEM 025 INDUSTRIAL PLUS can be used as a finished wearing surface or can be overlaid with industrial coatings.

Technical Data

• Packaging: 25kg lined paper sacks
• Water Addition: 5.6 - 6.0L per 25kg unit
• Working Time: 20 minutes at 20°C
• Time to Receive Tiled Floor Finishes: 2 hours @ 3mm
• Time to Receive Resilient Floor Finishes: 4 hours @ 3mm
• Application Thickness: Up to 25mm per pour
• Consumption of Powder: 1.7kg/m²/mm

Compressive Strength

• 1 day: >10MPa
• 7 days: >20MPa
• 28 days: >30MPa

Flexural Strength

• 1 day: >4MPa
• 7 days: >6MPa
• 28 days: >7MPa

Key Benefits

• Can be applied from 2mm to 25mm in one pour
• Single part, no additives required – just add water
• Light foot traffic after 90 minutes
• Protein-free
• Shrinkage compensated
• Pumpable
• High durability floor topping, AR2 wear rating
• Moisture tolerant
• OPC free

Coverage

Application

Mixing by Hand

1. Slowly mix 25kg of TEKCEM 025 INDUSTRIAL PLUS powder with 5.6 - 6.0 litres of water.
2. Add powder gradually to avoid clumping, mix until uniform consistency.
3. For a more fluid mix, add up to 6 litres of water maximum per 25kg unit.
4. Allow mixture to stand for 2 minutes before remixing and applying.
5. Use within 30 minutes of initial mixing.

Mixing by Pump

1. Follow the pump manufacturer’s recommendations for mixing.
2. Adjust water addition rate to achieve a smooth, cohesive mix.
3. Regularly perform flow checks during pumping.

Application Procedure

1. Pour or pump to the desired thickness, up to 25mm.
2. Trowel finish and allow to cure for 1-2 hours.
3. Surface should be “walkable” after approximately 3 hours at 20°C.
4. Ensure substrate is clean, dry, and properly primed.

Tools Required

• Steel trowel
• Spiked roller
• Mixing bucket
• Slow speed drill and paddle (for small projects)
• Mixer/pump (for high volume applications)

Storage & Shelf Life

Store in cool, dry conditions. Shelf life: 6 months in unopened bags

Health & Safety

Not classified under the Chemicals Hazard Information and Packaging for Supply Regulations. Material Safety Data Sheet available on request. Dispose of packaging and waste responsibly.

Click Here For Data Sheet