fermacell® perimeter strip is used for isolation between fermacell® Flooring Elements and adjacent structural elements.
Features:
Non-flammability A1
Non-flammable ROCKWOOL with a melting point of greater than 1000°C
High compression strength
High density ROCKWOOL
High heat and sound insulation.
Low heat conductance and low dynamic stiffness.
Recyclable.
ROCKWOOL can be processed and put back into the production cycle as a raw material.
Technical data:
Thickness - 10mm
Width - 30mm
Length - 60mtr
Construction material - Class A1
Melting point - >1000°C
Material - Class A1
Brand - Fermacell
Application:
Determine the finished height of the fermacell® Dry Flooring Elements and mark this off on the surrounding walls.
Place the Perimeter Strip on the wall or fix it to the wall using adhesive.
The upper edge of the Perimeter Strip should be at least 5mm above the finished height of the flooring elements.
Excess material should only be cut off after laying the floor covering, e.g. tubes.
If necessary, the height of the Perimeter Strip can be varied by applying two strips, one on top of the other.