Sonixx SX900 Flooring Adhesive 15kg

Sonixx SX900 Flooring Adhesive 15kg

Features & Benefits

• Achieves Approved Document E performance standards for Floor Type 1

• Significantly reduces impact sound at source

• Suitable for a variety of floor finishes

• Forgives minor subfloor imperfections

• Minimises subfloor preparation

• Can be installed over existing floor coverings without causing damage

• Quick and easy to install

• Will not deteriorate or collapse over time

• Can be used with underfloor heating systems

• Green Label Plus accredited for indoor air quality and low VOC emissions

Sonixx SX900 adhesive should be used to permanently bond Resilient 250 to the subfloor.

Coverage: Approximately 2-3m2 per kg depending on the porosity of the substrate and thickness of the adhesive film.

Open Time:
Up to 40 mins depending on conditions: Temp, Humidity, and surfaces to be treated.

Installation

The area of installation must be dry, smooth, dirt and dust free and weather tight. The subfloor must be sound and sufficiently level, with no imperfections protruding through Resilient 250. If not, then a self-levelling screed may be required. When bonding to bare concrete, a suitable concrete sealer is recommended to ensure maximum adhesive coverage and bond strength If moisture levels exceed 75% RH, seal the area with a suitable primer. Sonixx SX900 adhesive should be used to permanently bond Resilient 250 to the subfloor. Where possible, the skirting board should be installed above Resilient 250, in order to reduce flanking sound transmission. When installing ceramic tiles, stone and vinyl flooring, leave at least a 3mm gap around the perimeter, which should be filled with a flexible sealant.

15kg Tub